Jimmy Proof Deadbolt Locks
Jimmy PROOF DEADBOLT LOCKS FAQ's
What is Jimmy Proof Deadbolt Lock?
A Jimmy proof deadbolt lock is a type of lock that is mounted on the surface of the door and has a vertical bolt that interlocks with a strike plate on the frame. This design makes it resistant to forced entry by spreading door frames or prying the bolt with a crowbar or a similar tool. A Jimmy proof deadbolt lock can be single-cylinder or double-cylinder, meaning it can be operated with a key from one side or both sides of the door
What are the types of Jimmy Proof Deadbolt Lock?
There are two main types of Jimmy proof deadbolt locks: single-cylinder and double-cylinder.
- A single-cylinder Jimmy proof lock can be locked and unlocked with a key from the outside and with a thumb turn from the inside. Single-cylinder locks are more convenient and allow for quick exit in case of emergency
- A double cylinder Jimmy proof lock requires a key to operate the lock from both sides of the door. Double-cylinder locks are more secure and prevent unauthorized entry even if the glass on the door is broken
What are the Parts of the Jimmy Proof Deadbolt Lock?
- Cylinder: The part that contains the keyway and the pins that interact with the key. It can be single or double, meaning it can be operated with a key from one side or both sides of the door.
- Body: The part that contains the vertical bolt mechanism that secures the door. It is mounted on the inside surface of the door and has a thumb turn to operate the lock from the inside.
- Deadbolt: The part that extends from the body and interlocks with a strike plate on the door frame. It prevents the door from being pried open by spreading door frames or other tools.
- Strike plate: The part that is attached to the door frame and receives the deadbolt when the door is closed. It provides a secure fit for the lock and protects the door frame from damage.
How to Install Jimmy Proof Deadbolt Lock?
- Mark the position of the lock body and the cylinder on the inside surface of the door using a template or a ruler and a level.
- Drill a hole for the cylinder using a hole saw or a spade bit suitable for your door material (wood or metal).
- Drill pilot holes for the lock body screws using a drill bit.
- Install the cylinder on the outside of the door using a spanner wrench or a screwdriver. Make sure the cylinder is aligned with the hole and flush with the door surface.
- Install the lock body on the inside of the door using screws and washers. Make sure the lock body is aligned with the pilot holes and level with the door edge.
- Connect the cylinder and the lock body with a tailpiece or a connecting bar. Adjust the length of the tailpiece or bar if needed.
- Test the lock by inserting the key and turning it. The lock should operate smoothly and securely.
- Mark the position of the strike plate on the door frame using a template or a ruler and a level.
- Drill pilot holes for the strike plate screws using a drill bit.
- Install the strike plate on the door frame using screws and washers. Make sure the strike plate is aligned with the pilot holes and level with the frame edge.
- Test the lock by closing and opening the door several times. The deadbolt should fit into the strike plate snugly and firmly.